Page 1 of 1

Projecting an Image to pointcloud data

Posted: Tue Nov 24, 2020 3:48 pm
by cuatcside
Is it possible to colorize a pointcloud data using an bmp/jpg image after aligning the image to pointcloud or aligning pointcloud to an image?
Thanks.

Re: Projecting an Image to pointcloud data

Posted: Wed Nov 25, 2020 11:19 am
by daniel
Not in CloudCompare sadly.

Re: Projecting an Image to pointcloud data

Posted: Mon Mar 22, 2021 6:56 pm
by Mike_P
Hi Daniel,

I've seen from earlier post that is was a project. Is it still on the table or nobody got time for that?

Thanks of lot.

Re: Projecting an Image to pointcloud data

Posted: Tue Mar 23, 2021 8:25 pm
by daniel
Ah, still not implemented sadly...

Re: Projecting an Image to pointcloud data

Posted: Wed Mar 24, 2021 3:11 pm
by dreiländereck
cuatcside wrote: Tue Nov 24, 2020 3:48 pm Is it possible to colorize a pointcloud data using an bmp/jpg image after aligning the image to pointcloud or aligning pointcloud to an image?
Thanks.
Just have a look into this video, which I found on YouTube.

Re: Projecting an Image to pointcloud data

Posted: Wed Mar 24, 2021 5:14 pm
by Mike_P
daniel wrote: Tue Mar 23, 2021 8:25 pm Ah, still not implemented sadly...
Ok, thank you for the answer. CC is already awesome.

Re: Projecting an Image to pointcloud data

Posted: Wed Mar 24, 2021 5:16 pm
by Mike_P
dreiländereck wrote: Wed Mar 24, 2021 3:11 pm
cuatcside wrote: Tue Nov 24, 2020 3:48 pm Is it possible to colorize a pointcloud data using an bmp/jpg image after aligning the image to pointcloud or aligning pointcloud to an image?
Thanks.
Just have a look into this video, which I found on YouTube.
Thank you very much for the link. But, I am looking for some pictures taken from the ground, knowing all the info about camera position, orientation, distorsion, etc.

Re: Projecting an Image to pointcloud data

Posted: Sat Mar 27, 2021 8:29 pm
by dreiländereck
Mike_P wrote: Wed Mar 24, 2021 5:16 pm
dreiländereck wrote: Wed Mar 24, 2021 3:11 pm
cuatcside wrote: Tue Nov 24, 2020 3:48 pm Is it possible to colorize a pointcloud data using an bmp/jpg image after aligning the image to pointcloud or aligning pointcloud to an image?
Thanks.
Just have a look into this video, which I found on YouTube.
Thank you very much for the link. But, I am looking for some pictures taken from the ground, knowing all the info about camera position, orientation, distorsion, etc.
Just another link, at this time with an orthophoto. But your well aligned photo can be orientated to the pointcloud like the orthophoto.

https://youtu.be/zFuq2A46zHI